|
Clamp Style Recommendations
-
For low pressure joins, up to 7 PSI, a standard worm drive clamp is recommended.
-
For joints with higher pressure that do not exceed 50 PSI, a constant pressure style clamp is recommended (T-Bolt, Belleville, and Wave Liner).
-
For pressure lines exceeding 50 PSI, a T-Bolt style clamp or hose assembly with crimped fittings should be used.
Working Diameter:
100 - 106.1 mm
Hose Clamp Type:
T-Bolt Spring
Working Diameter:
4 - 4 1/8 in
|